Zoltan2 Version of the Day
Defines
Zoltan2_XML_Parameters.hpp File Reference
This graph shows which files directly or indirectly include this file:

Go to the source code of this file.

Defines

#define ZOLTAN2_XML_PARAMETER_STRING   " \ <ParameterList name=\"zoltan2ValidatingParameters\"> \ <Parameter \ id=\"0\" name=\"error_check_level\" type=\"string\" validatorId=\"0\" value=\"basic_assertions\" \ docString=' the amount of error checking performed \ (If the compile flag Z2_OMIT_ALL_ERROR_CHECKING was set, \ then error checking code is not executed at runtime.)' \ /> \ <Parameter \ id=\"1\" name=\"debug_level\" type=\"string\" validatorId=\"1\" value=\"basic_status\" \ docString=' the amount of status/debugging/warning information to print' \ /> \ <Parameter \ id=\"2\" name=\"timer_type\" type=\"string\" validatorId=\"2\" value=\"no_timers\" \ docString=' the type of timing information to collect \ (If the compile flag Z2_OMIT_ALL_PROFILING was set, \ then the timing code is not executed at runtime.)' \ /> \ <Parameter \ id=\"3\" name=\"debug_output_stream\" type=\"string\" validatorId=\"3\" value=\"cout\" \ docString=' output stream for debug/status/warning messages (default cout)' \ /> \ <Parameter \ id=\"4\" name=\"timer_output_stream\" type=\"string\" validatorId=\"4\" value=\"cout\" \ docString=' output stream for timing report (default cout)' \ /> \ <Parameter \ id=\"5\" name=\"memory_output_stream\" type=\"string\" validatorId=\"5\" value=\"cout\" \ docString=' output stream for memory usage messages (default cout)' \ /> \ <Parameter \ id=\"6\" name=\"debug_output_file\" type=\"string\" validatorId=\"6\" value=\"/dev/null\" \ docString=' name of file to which debug/status messages should be written \ (process rank will be included in file name)' \ /> \ <Parameter \ id=\"7\" name=\"timer_output_file\" type=\"string\" validatorId=\"6\" value=\"/dev/null\" \ docString=' name of file to which timing information should be written \ (process rank will be included in file name)' \ /> \ <Parameter \ id=\"8\" name=\"memory_output_file\" type=\"string\" validatorId=\"6\" value=\"/dev/null\" \ docString=' name of file to which memory profiling information should be written \ (process rank will be included in file name)' \ /> \ <Parameter \ id=\"9\" name=\"debug_procs\" type=\"string\" validatorId=\"7\" value=\"0\" \ docString=' list of ranks that output debugging/status messages (default \"0\")' \ /> \ <Parameter \ id=\"10\" name=\"pqParts\" type=\"string\" validatorId=\"8\" value=\"0\" \ docString=' list of parts for multiJagged partitioning algorithm. As many as the dimension count.' \ /> \ <Parameter \ id=\"11\" name=\"memory_procs\" type=\"string\" validatorId=\"9\" value=\"0\" \ docString=' list of ranks that do memory profiling information (default \"0\")' \ /> \ <Parameter \ id=\"12\" name=\"speed_versus_quality\" type=\"string\" validatorId=\"10\" value=\"balance\" \ docString=' When algorithm choices exist, opt for speed or solution quality? \ (Default is a balance of speed and quality)' \ /> \ <Parameter \ id=\"13\" name=\"memory_versus_speed\" type=\"string\" validatorId=\"11\" value=\"balance\" \ docString=' When algorithm choices exist, opt for the use of less memory \ at the expense of runtime \ (Default is a balance of memory conservation and speed)' \ /> \ <Parameter \ id=\"14\" name=\"random_seed\" type=\"string\" validatorId=\"12\" value=\"0.5\" \ docString=' random seed' \ /> \ <Parameter \ id=\"15\" name=\"order_method\" type=\"string\" validatorId=\"13\" value=\"rcm\" \ docString=' order algorithm' \ /> \ <Parameter \ id=\"16\" name=\"order_package\" type=\"string\" validatorId=\"14\" value=\"amd\" \ docString=' package to use in ordering' \ /> \ <Parameter \ id=\"17\" name=\"compute_metrics\" type=\"string\" validatorId=\"15\" value=\"no\" \ docString=' Compute metrics after computing solution' \ /> \ <Parameter \ id=\"18\" name=\"topology\" type=\"string\" validatorId=\"16\" value=\"\" \ docString='Topology of node to be used in hierarchical partitioning \ \"2,4\" for dual-socket quad-core \ \"2,2,6\" for dual-socket, dual-die, six-core \ \"2,2,3\" for dual-socket, dual-die, six-core but \ with only three partitions per die' \ /> \ <Parameter \ id=\"19\" name=\"randomize_input\" type=\"string\" validatorId=\"17\" value=\"no\" \ docString=' randomize input prior to partitioning' \ /> \ <Parameter \ id=\"20\" name=\"partitioning_objective\" type=\"string\" validatorId=\"18\" value=\"balance_object_weight\" \ docString=' objective of partitioning (default depends on algorithm)' \ /> \ <Parameter \ id=\"21\" name=\"imbalance_tolerance\" type=\"string\" validatorId=\"19\" value=\"1.1\" \ docString=' imbalance tolerance, ratio of maximum load over average load (default 1.1)' \ /> \ <Parameter \ id=\"22\" name=\"num_global_parts\" type=\"string\" validatorId=\"20\" value=\"0\" \ docString=' global number of parts to compute (default is number of processes)' \ /> \ <Parameter \ id=\"23\" name=\"num_local_parts\" type=\"string\" validatorId=\"21\" value=\"0\" \ docString=' number of parts to compute for this process(default is one)' \ /> \ <Parameter \ id=\"24\" name=\"partitioning_approach\" type=\"string\" validatorId=\"22\" value=\"partition\" \ docString=' Partition from scratch, partition incrementally from current \ partition, of partition from scratch but maximize overlap \ with the current partition (default is \"partition\" from scratch)' \ /> \ <Parameter \ id=\"25\" name=\"objects_to_partition\" type=\"string\" validatorId=\"23\" value=\"graph_vertices\" \ docString=' Objects to be partitioned (defaults are \"matrix_rows\" for \ matrix input, \"mesh_nodes\" for mesh input, and \"graph_vertices\" \ for graph input)' \ /> \ <Parameter \ id=\"26\" name=\"model\" type=\"string\" validatorId=\"24\" value=\"graph\" \ docString=' This is a low level parameter. Normally the library will choose \ a computational model based on the algorithm or objective specified \ by the user.' \ /> \ <Parameter \ id=\"27\" name=\"algorithm\" type=\"string\" validatorId=\"25\" value=\"random\" \ docString=' partitioning algorithm' \ /> \ <Parameter \ id=\"28\" name=\"rectilinear_blocks\" type=\"string\" validatorId=\"26\" value=\"no\" \ docString=' If true, then when a cut is made, all of the dots located on the cut \ are moved to the same side of the cut. The resulting regions are then \ rectilinear. The resulting load balance may not be as good as when \ the group of dots is split by the cut. Default is false.' \ /> \ <Parameter \ id=\"29\" name=\"average_cuts\" type=\"string\" validatorId=\"27\" value=\"no\" \ docString=' When true, coordinates of RCB cutting planes are computed to be \ the average of the coordinates of the closest object on each side \ of the cut. Otherwise, coordinates of cutting planes may equal \ those of one of the closest objects. Default is false.' \ /> \ <Parameter \ id=\"30\" name=\"bisection_num_test_cuts\" type=\"int\" validatorId=\"28\" value=\"1\" \ docString=' Experimental: number of test cuts to do simultaneously (default is 1)' \ /> \ <Parameter \ id=\"31\" name=\"symmetrize_input\" type=\"string\" validatorId=\"29\" value=\"no\" \ docString=' Symmetrize input prior to pList. If \"transpose\", \ symmetrize A by computing A plus ATranspose. If \"bipartite\", \ A becomes [[0 A][ATranspose 0]]. ' \ /> \ <Parameter \ id=\"32\" name=\"subset_graph\" type=\"string\" validatorId=\"30\" value=\"no\" \ docString=' If \"yes\", the graph input is to be subsetted. If a vertex neighbor \ is not a valid vertex, it will be omitted from the pList. Otherwise, \ an invalid neighbor identifier is considered an error.' \ /> \ <Parameter \ id=\"33\" name=\"force_binary_search\" type=\"string\" validatorId=\"31\" value=\"no\" \ docString=\"If true, then regardless of the part number, cut line will be searched using binary search.\n\" \ /> \ <Parameter \ id=\"34\" name=\"force_linear_search\" type=\"string\" validatorId=\"32\" value=\"no\" \ docString=\"If true, then regardless of the part number, cut line will be searched using linear search.\n\" \ /> \ <Parameter \ id=\"35\" name=\"parallel_part_calculation_count\" type=\"int\" validatorId=\"33\" value=\"1\" \ docString=\"The number of parts whose cut coordinates will be calculated concurently.\" \ /> \ <Validators> \ <Validator defaultParameterName=\"error_check_level\" integralValue=\"int\" type=\"StringIntegralValidator(int)\" validatorId=\"0\"> \ <String integralValue=\"0\" stringDoc=\"no assertions will be performed\" stringValue=\"no_assertions\"/> \ <String integralValue=\"1\" stringDoc=\"typical checks of argument validity (fast, default)\" stringValue=\"basic_assertions\"/> \ <String integralValue=\"2\" stringDoc=\"additional checks, i.e. is input graph a valid graph)\" stringValue=\"complex_assertions\"/> \ <String integralValue=\"3\" stringDoc=\"check for everything including logic errors (slowest)\" stringValue=\"debug_mode_assertions\"/> \ </Validator> \ <Validator defaultParameterName=\"debug_output_stream\" integralValue=\"int\" type=\"StringIntegralValidator(int)\" validatorId=\"3\"> \ <String integralValue=\"0\" stringValue=\"std::cout\"/> \ <String integralValue=\"0\" stringValue=\"cout\"/> \ <String integralValue=\"0\" stringValue=\"stdout\"/> \ <String integralValue=\"1\" stringValue=\"std::cerr\"/> \ <String integralValue=\"1\" stringValue=\"cerr\"/> \ <String integralValue=\"1\" stringValue=\"stderr\"/> \ <String integralValue=\"2\" stringValue=\"/dev/null\"/> \ <String integralValue=\"2\" stringValue=\"null\"/> \ </Validator> \ <Validator defaultParameterName=\"debug_level\" integralValue=\"int\" type=\"StringIntegralValidator(int)\" validatorId=\"1\"> \ <String integralValue=\"0\" stringDoc=\"library outputs no status information\" stringValue=\"no_status\"/> \ <String integralValue=\"1\" stringDoc=\"library outputs basic status information (default)\" stringValue=\"basic_status\"/> \ <String integralValue=\"2\" stringDoc=\"library outputs detailed information\" stringValue=\"detailed_status\"/> \ <String integralValue=\"3\" stringDoc=\"library outputs very detailed information\" stringValue=\"verbose_detailed_status\"/> \ </Validator> \ <Validator defaultParameterName=\"timer_type\" integralValue=\"int\" type=\"StringIntegralValidator(int)\" validatorId=\"2\"> \ <String integralValue=\"0\" stringDoc=\"No timing data will be collected (the default).\" stringValue=\"no_timers\"/> \ <String integralValue=\"1\" stringDoc=\"Time an algorithm (or other entity) as a whole.\" stringValue=\"macro_timers\"/> \ <String integralValue=\"2\" stringDoc=\"Time the substeps of an entity.\" stringValue=\"micro_timers\"/> \ <String integralValue=\"3\" stringDoc=\"Run both MACRO and MICRO timers.\" stringValue=\"both_timers\"/> \ <String integralValue=\"4\" stringDoc=\"Run timers added to code for testing, removed later\" stringValue=\"test_timers\"/> \ </Validator> \ <Validator defaultParameterName=\"timer_output_stream\" integralValue=\"int\" type=\"StringIntegralValidator(int)\" validatorId=\"4\"> \ <String integralValue=\"0\" stringValue=\"std::cout\"/> \ <String integralValue=\"0\" stringValue=\"cout\"/> \ <String integralValue=\"0\" stringValue=\"stdout\"/> \ <String integralValue=\"1\" stringValue=\"std::cerr\"/> \ <String integralValue=\"1\" stringValue=\"cerr\"/> \ <String integralValue=\"1\" stringValue=\"stderr\"/> \ <String integralValue=\"2\" stringValue=\"/dev/null\"/> \ <String integralValue=\"2\" stringValue=\"null\"/> \ </Validator> \ <Validator defaultParameterName=\"memory_output_stream\" integralValue=\"int\" type=\"StringIntegralValidator(int)\" validatorId=\"5\"> \ <String integralValue=\"0\" stringValue=\"std::cout\"/> \ <String integralValue=\"0\" stringValue=\"cout\"/> \ <String integralValue=\"0\" stringValue=\"stdout\"/> \ <String integralValue=\"1\" stringValue=\"std::cerr\"/> \ <String integralValue=\"1\" stringValue=\"cerr\"/> \ <String integralValue=\"1\" stringValue=\"stderr\"/> \ <String integralValue=\"2\" stringValue=\"/dev/null\"/> \ <String integralValue=\"2\" stringValue=\"null\"/> \ </Validator> \ <Validator fileMustExist=\"false\" type=\"FilenameValidator\" validatorId=\"6\"/> \ <Validator type=\"IntegerRangeListValidator(int)\" unsorted=\"false\" validatorId=\"7\"/> \ <Validator type=\"IntegerRangeListValidator(int)\" unsorted=\"false\" validatorId=\"9\"/> \ <Validator type=\"IntegerRangeListValidator(int)\" unsorted=\"true\" validatorId=\"8\"/> \ <Validator type=\"StringValidator\" validatorId=\"10\"> \ <String value=\"speed\"/> \ <String value=\"balance\"/> \ <String value=\"quality\"/> \ </Validator> \ <Validator allowDouble=\"true\" allowInt=\"true\" allowString=\"true\" prefferedType=\"double\" type=\"anynumberValidator\" validatorId=\"12\"/> \ <Validator type=\"StringValidator\" validatorId=\"11\"> \ <String value=\"memory\"/> \ <String value=\"balance\"/> \ <String value=\"speed\"/> \ </Validator> \ <Validator type=\"StringValidator\" validatorId=\"13\"> \ <String value=\"rcm\"/> \ <String value=\"minimum_degree\"/> \ <String value=\"natural\"/> \ <String value=\"random\"/> \ </Validator> \ <Validator defaultParameterName=\"compute_metrics\" integralValue=\"int\" type=\"StringIntegralValidator(int)\" validatorId=\"15\"> \ <String integralValue=\"1\" stringValue=\"true\"/> \ <String integralValue=\"1\" stringValue=\"yes\"/> \ <String integralValue=\"1\" stringValue=\"1\"/> \ <String integralValue=\"1\" stringValue=\"on\"/> \ <String integralValue=\"0\" stringValue=\"false\"/> \ <String integralValue=\"0\" stringValue=\"no\"/> \ <String integralValue=\"0\" stringValue=\"0\"/> \ <String integralValue=\"0\" stringValue=\"off\"/> \ </Validator> \ <Validator type=\"StringValidator\" validatorId=\"14\"> \ <String value=\"amd\"/> \ <String value=\"package2\"/> \ <String value=\"package3\"/> \ </Validator> \ <Validator defaultParameterName=\"randomize_input\" integralValue=\"int\" type=\"StringIntegralValidator(int)\" validatorId=\"17\"> \ <String integralValue=\"1\" stringValue=\"true\"/> \ <String integralValue=\"1\" stringValue=\"yes\"/> \ <String integralValue=\"1\" stringValue=\"1\"/> \ <String integralValue=\"1\" stringValue=\"on\"/> \ <String integralValue=\"0\" stringValue=\"false\"/> \ <String integralValue=\"0\" stringValue=\"no\"/> \ <String integralValue=\"0\" stringValue=\"0\"/> \ <String integralValue=\"0\" stringValue=\"off\"/> \ </Validator> \ <Validator type=\"IntegerRangeListValidator(int)\" unsorted=\"true\" validatorId=\"16\"/> \ <Validator allowDouble=\"true\" allowInt=\"true\" allowString=\"true\" prefferedType=\"double\" type=\"anynumberValidator\" validatorId=\"19\"/> \ <Validator allowDouble=\"true\" allowInt=\"true\" allowString=\"true\" prefferedType=\"double\" type=\"anynumberValidator\" validatorId=\"20\"/> \ <Validator type=\"StringValidator\" validatorId=\"18\"> \ <String value=\"balance_object_count\"/> \ <String value=\"balance_object_weight\"/> \ <String value=\"multicriteria_minimize_total_weight\"/> \ <String value=\"multicriteria_minimize_maximum_weight\"/> \ <String value=\"multicriteria_balance_total_maximum\"/> \ <String value=\"minimize_cut_edge_count\"/> \ <String value=\"minimize_cut_edge_weight\"/> \ <String value=\"minimize_neighboring_parts\"/> \ <String value=\"minimize_boundary_vertices\"/> \ </Validator> \ <Validator allowDouble=\"true\" allowInt=\"true\" allowString=\"true\" prefferedType=\"double\" type=\"anynumberValidator\" validatorId=\"21\"/> \ <Validator type=\"StringValidator\" validatorId=\"22\"> \ <String value=\"partition\"/> \ <String value=\"repartition\"/> \ <String value=\"maximize_overlap\"/> \ </Validator> \ <Validator type=\"StringValidator\" validatorId=\"23\"> \ <String value=\"matrix_rows\"/> \ <String value=\"matrix_columns\"/> \ <String value=\"matrix_nonzeros\"/> \ <String value=\"mesh_elements\"/> \ <String value=\"mesh_nodes\"/> \ <String value=\"graph_edges\"/> \ <String value=\"graph_vertices\"/> \ <String value=\"coordinates\"/> \ <String value=\"identifiers\"/> \ </Validator> \ <Validator type=\"StringValidator\" validatorId=\"24\"> \ <String value=\"hypergraph\"/> \ <String value=\"graph\"/> \ <String value=\"geometry\"/> \ <String value=\"ids\"/> \ </Validator> \ <Validator type=\"StringValidator\" validatorId=\"25\"> \ <String value=\"rcb\"/> \ <String value=\"multijagged\"/> \ <String value=\"rib\"/> \ <String value=\"hsfc\"/> \ <String value=\"patoh\"/> \ <String value=\"phg\"/> \ <String value=\"metis\"/> \ <String value=\"parmetis\"/> \ <String value=\"scotch\"/> \ <String value=\"ptscotch\"/> \ <String value=\"block\"/> \ <String value=\"cyclic\"/> \ <String value=\"random\"/> \ </Validator> \ <Validator defaultParameterName=\"rectilinear_blocks\" integralValue=\"int\" type=\"StringIntegralValidator(int)\" validatorId=\"26\"> \ <String integralValue=\"1\" stringValue=\"true\"/> \ <String integralValue=\"1\" stringValue=\"yes\"/> \ <String integralValue=\"1\" stringValue=\"1\"/> \ <String integralValue=\"1\" stringValue=\"on\"/> \ <String integralValue=\"0\" stringValue=\"false\"/> \ <String integralValue=\"0\" stringValue=\"no\"/> \ <String integralValue=\"0\" stringValue=\"0\"/> \ <String integralValue=\"0\" stringValue=\"off\"/> \ </Validator> \ <Validator defaultParameterName=\"average_cuts\" integralValue=\"int\" type=\"StringIntegralValidator(int)\" validatorId=\"27\"> \ <String integralValue=\"1\" stringValue=\"true\"/> \ <String integralValue=\"1\" stringValue=\"yes\"/> \ <String integralValue=\"1\" stringValue=\"1\"/> \ <String integralValue=\"1\" stringValue=\"on\"/> \ <String integralValue=\"0\" stringValue=\"false\"/> \ <String integralValue=\"0\" stringValue=\"no\"/> \ <String integralValue=\"0\" stringValue=\"0\"/> \ <String integralValue=\"0\" stringValue=\"off\"/> \ </Validator> \ <Validator max=\"250\" min=\"1\" precision=\"0\" step=\"1\" type=\"EnhancedNumberValidator(int)\" validatorId=\"28\"/> \ <Validator type=\"StringValidator\" validatorId=\"29\"> \ <String value=\"no\"/> \ <String value=\"transpose\"/> \ <String value=\"bipartite\"/> \ </Validator> \ <Validator defaultParameterName=\"subset_graph\" integralValue=\"int\" type=\"StringIntegralValidator(int)\" validatorId=\"30\"> \ <String integralValue=\"1\" stringValue=\"true\"/> \ <String integralValue=\"1\" stringValue=\"yes\"/> \ <String integralValue=\"1\" stringValue=\"1\"/> \ <String integralValue=\"1\" stringValue=\"on\"/> \ <String integralValue=\"0\" stringValue=\"false\"/> \ <String integralValue=\"0\" stringValue=\"no\"/> \ <String integralValue=\"0\" stringValue=\"0\"/> \ <String integralValue=\"0\" stringValue=\"off\"/> \ </Validator> \ <Validator defaultParameterName=\"force_binary_search\" integralValue=\"int\" type=\"StringIntegralValidator(int)\" validatorId=\"31\"> \ <String integralValue=\"1\" stringValue=\"true\"/> \ <String integralValue=\"1\" stringValue=\"yes\"/> \ <String integralValue=\"1\" stringValue=\"1\"/> \ <String integralValue=\"1\" stringValue=\"on\"/> \ <String integralValue=\"0\" stringValue=\"false\"/> \ <String integralValue=\"0\" stringValue=\"no\"/> \ <String integralValue=\"0\" stringValue=\"0\"/> \ <String integralValue=\"0\" stringValue=\"off\"/> \ </Validator> \ <Validator defaultParameterName=\"force_linear_search\" integralValue=\"int\" type=\"StringIntegralValidator(int)\" validatorId=\"32\"> \ <String integralValue=\"1\" stringValue=\"true\"/> \ <String integralValue=\"1\" stringValue=\"yes\"/> \ <String integralValue=\"1\" stringValue=\"1\"/> \ <String integralValue=\"1\" stringValue=\"on\"/> \ <String integralValue=\"0\" stringValue=\"false\"/> \ <String integralValue=\"0\" stringValue=\"no\"/> \ <String integralValue=\"0\" stringValue=\"0\"/> \ <String integralValue=\"0\" stringValue=\"off\"/> \ </Validator> \ <Validator defaultParameterName=\"parallel_part_calculation_count\" allowDouble=\"false\" allowInt=\"true\" allowString=\"true\" prefferedType=\"int\" type=\"anynumberValidator\" validatorId=\"33\"/> \ </Validators> \ </ParameterList>"

Define Documentation

#define ZOLTAN2_XML_PARAMETER_STRING   " \ <ParameterList name=\"zoltan2ValidatingParameters\"> \ <Parameter \ id=\"0\" name=\"error_check_level\" type=\"string\" validatorId=\"0\" value=\"basic_assertions\" \ docString=' the amount of error checking performed \ (If the compile flag Z2_OMIT_ALL_ERROR_CHECKING was set, \ then error checking code is not executed at runtime.)' \ /> \ <Parameter \ id=\"1\" name=\"debug_level\" type=\"string\" validatorId=\"1\" value=\"basic_status\" \ docString=' the amount of status/debugging/warning information to print' \ /> \ <Parameter \ id=\"2\" name=\"timer_type\" type=\"string\" validatorId=\"2\" value=\"no_timers\" \ docString=' the type of timing information to collect \ (If the compile flag Z2_OMIT_ALL_PROFILING was set, \ then the timing code is not executed at runtime.)' \ /> \ <Parameter \ id=\"3\" name=\"debug_output_stream\" type=\"string\" validatorId=\"3\" value=\"cout\" \ docString=' output stream for debug/status/warning messages (default cout)' \ /> \ <Parameter \ id=\"4\" name=\"timer_output_stream\" type=\"string\" validatorId=\"4\" value=\"cout\" \ docString=' output stream for timing report (default cout)' \ /> \ <Parameter \ id=\"5\" name=\"memory_output_stream\" type=\"string\" validatorId=\"5\" value=\"cout\" \ docString=' output stream for memory usage messages (default cout)' \ /> \ <Parameter \ id=\"6\" name=\"debug_output_file\" type=\"string\" validatorId=\"6\" value=\"/dev/null\" \ docString=' name of file to which debug/status messages should be written \ (process rank will be included in file name)' \ /> \ <Parameter \ id=\"7\" name=\"timer_output_file\" type=\"string\" validatorId=\"6\" value=\"/dev/null\" \ docString=' name of file to which timing information should be written \ (process rank will be included in file name)' \ /> \ <Parameter \ id=\"8\" name=\"memory_output_file\" type=\"string\" validatorId=\"6\" value=\"/dev/null\" \ docString=' name of file to which memory profiling information should be written \ (process rank will be included in file name)' \ /> \ <Parameter \ id=\"9\" name=\"debug_procs\" type=\"string\" validatorId=\"7\" value=\"0\" \ docString=' list of ranks that output debugging/status messages (default \"0\")' \ /> \ <Parameter \ id=\"10\" name=\"pqParts\" type=\"string\" validatorId=\"8\" value=\"0\" \ docString=' list of parts for multiJagged partitioning algorithm. As many as the dimension count.' \ /> \ <Parameter \ id=\"11\" name=\"memory_procs\" type=\"string\" validatorId=\"9\" value=\"0\" \ docString=' list of ranks that do memory profiling information (default \"0\")' \ /> \ <Parameter \ id=\"12\" name=\"speed_versus_quality\" type=\"string\" validatorId=\"10\" value=\"balance\" \ docString=' When algorithm choices exist, opt for speed or solution quality? \ (Default is a balance of speed and quality)' \ /> \ <Parameter \ id=\"13\" name=\"memory_versus_speed\" type=\"string\" validatorId=\"11\" value=\"balance\" \ docString=' When algorithm choices exist, opt for the use of less memory \ at the expense of runtime \ (Default is a balance of memory conservation and speed)' \ /> \ <Parameter \ id=\"14\" name=\"random_seed\" type=\"string\" validatorId=\"12\" value=\"0.5\" \ docString=' random seed' \ /> \ <Parameter \ id=\"15\" name=\"order_method\" type=\"string\" validatorId=\"13\" value=\"rcm\" \ docString=' order algorithm' \ /> \ <Parameter \ id=\"16\" name=\"order_package\" type=\"string\" validatorId=\"14\" value=\"amd\" \ docString=' package to use in ordering' \ /> \ <Parameter \ id=\"17\" name=\"compute_metrics\" type=\"string\" validatorId=\"15\" value=\"no\" \ docString=' Compute metrics after computing solution' \ /> \ <Parameter \ id=\"18\" name=\"topology\" type=\"string\" validatorId=\"16\" value=\"\" \ docString='Topology of node to be used in hierarchical partitioning \ \"2,4\" for dual-socket quad-core \ \"2,2,6\" for dual-socket, dual-die, six-core \ \"2,2,3\" for dual-socket, dual-die, six-core but \ with only three partitions per die' \ /> \ <Parameter \ id=\"19\" name=\"randomize_input\" type=\"string\" validatorId=\"17\" value=\"no\" \ docString=' randomize input prior to partitioning' \ /> \ <Parameter \ id=\"20\" name=\"partitioning_objective\" type=\"string\" validatorId=\"18\" value=\"balance_object_weight\" \ docString=' objective of partitioning (default depends on algorithm)' \ /> \ <Parameter \ id=\"21\" name=\"imbalance_tolerance\" type=\"string\" validatorId=\"19\" value=\"1.1\" \ docString=' imbalance tolerance, ratio of maximum load over average load (default 1.1)' \ /> \ <Parameter \ id=\"22\" name=\"num_global_parts\" type=\"string\" validatorId=\"20\" value=\"0\" \ docString=' global number of parts to compute (default is number of processes)' \ /> \ <Parameter \ id=\"23\" name=\"num_local_parts\" type=\"string\" validatorId=\"21\" value=\"0\" \ docString=' number of parts to compute for this process(default is one)' \ /> \ <Parameter \ id=\"24\" name=\"partitioning_approach\" type=\"string\" validatorId=\"22\" value=\"partition\" \ docString=' Partition from scratch, partition incrementally from current \ partition, of partition from scratch but maximize overlap \ with the current partition (default is \"partition\" from scratch)' \ /> \ <Parameter \ id=\"25\" name=\"objects_to_partition\" type=\"string\" validatorId=\"23\" value=\"graph_vertices\" \ docString=' Objects to be partitioned (defaults are \"matrix_rows\" for \ matrix input, \"mesh_nodes\" for mesh input, and \"graph_vertices\" \ for graph input)' \ /> \ <Parameter \ id=\"26\" name=\"model\" type=\"string\" validatorId=\"24\" value=\"graph\" \ docString=' This is a low level parameter. Normally the library will choose \ a computational model based on the algorithm or objective specified \ by the user.' \ /> \ <Parameter \ id=\"27\" name=\"algorithm\" type=\"string\" validatorId=\"25\" value=\"random\" \ docString=' partitioning algorithm' \ /> \ <Parameter \ id=\"28\" name=\"rectilinear_blocks\" type=\"string\" validatorId=\"26\" value=\"no\" \ docString=' If true, then when a cut is made, all of the dots located on the cut \ are moved to the same side of the cut. The resulting regions are then \ rectilinear. The resulting load balance may not be as good as when \ the group of dots is split by the cut. Default is false.' \ /> \ <Parameter \ id=\"29\" name=\"average_cuts\" type=\"string\" validatorId=\"27\" value=\"no\" \ docString=' When true, coordinates of RCB cutting planes are computed to be \ the average of the coordinates of the closest object on each side \ of the cut. Otherwise, coordinates of cutting planes may equal \ those of one of the closest objects. Default is false.' \ /> \ <Parameter \ id=\"30\" name=\"bisection_num_test_cuts\" type=\"int\" validatorId=\"28\" value=\"1\" \ docString=' Experimental: number of test cuts to do simultaneously (default is 1)' \ /> \ <Parameter \ id=\"31\" name=\"symmetrize_input\" type=\"string\" validatorId=\"29\" value=\"no\" \ docString=' Symmetrize input prior to pList. If \"transpose\", \ symmetrize A by computing A plus ATranspose. If \"bipartite\", \ A becomes [[0 A][ATranspose 0]]. ' \ /> \ <Parameter \ id=\"32\" name=\"subset_graph\" type=\"string\" validatorId=\"30\" value=\"no\" \ docString=' If \"yes\", the graph input is to be subsetted. If a vertex neighbor \ is not a valid vertex, it will be omitted from the pList. Otherwise, \ an invalid neighbor identifier is considered an error.' \ /> \ <Parameter \ id=\"33\" name=\"force_binary_search\" type=\"string\" validatorId=\"31\" value=\"no\" \ docString=\"If true, then regardless of the part number, cut line will be searched using binary search.\n\" \ /> \ <Parameter \ id=\"34\" name=\"force_linear_search\" type=\"string\" validatorId=\"32\" value=\"no\" \ docString=\"If true, then regardless of the part number, cut line will be searched using linear search.\n\" \ /> \ <Parameter \ id=\"35\" name=\"parallel_part_calculation_count\" type=\"int\" validatorId=\"33\" value=\"1\" \ docString=\"The number of parts whose cut coordinates will be calculated concurently.\" \ /> \ <Validators> \ <Validator defaultParameterName=\"error_check_level\" integralValue=\"int\" type=\"StringIntegralValidator(int)\" validatorId=\"0\"> \ <String integralValue=\"0\" stringDoc=\"no assertions will be performed\" stringValue=\"no_assertions\"/> \ <String integralValue=\"1\" stringDoc=\"typical checks of argument validity (fast, default)\" stringValue=\"basic_assertions\"/> \ <String integralValue=\"2\" stringDoc=\"additional checks, i.e. is input graph a valid graph)\" stringValue=\"complex_assertions\"/> \ <String integralValue=\"3\" stringDoc=\"check for everything including logic errors (slowest)\" stringValue=\"debug_mode_assertions\"/> \ </Validator> \ <Validator defaultParameterName=\"debug_output_stream\" integralValue=\"int\" type=\"StringIntegralValidator(int)\" validatorId=\"3\"> \ <String integralValue=\"0\" stringValue=\"std::cout\"/> \ <String integralValue=\"0\" stringValue=\"cout\"/> \ <String integralValue=\"0\" stringValue=\"stdout\"/> \ <String integralValue=\"1\" stringValue=\"std::cerr\"/> \ <String integralValue=\"1\" stringValue=\"cerr\"/> \ <String integralValue=\"1\" stringValue=\"stderr\"/> \ <String integralValue=\"2\" stringValue=\"/dev/null\"/> \ <String integralValue=\"2\" stringValue=\"null\"/> \ </Validator> \ <Validator defaultParameterName=\"debug_level\" integralValue=\"int\" type=\"StringIntegralValidator(int)\" validatorId=\"1\"> \ <String integralValue=\"0\" stringDoc=\"library outputs no status information\" stringValue=\"no_status\"/> \ <String integralValue=\"1\" stringDoc=\"library outputs basic status information (default)\" stringValue=\"basic_status\"/> \ <String integralValue=\"2\" stringDoc=\"library outputs detailed information\" stringValue=\"detailed_status\"/> \ <String integralValue=\"3\" stringDoc=\"library outputs very detailed information\" stringValue=\"verbose_detailed_status\"/> \ </Validator> \ <Validator defaultParameterName=\"timer_type\" integralValue=\"int\" type=\"StringIntegralValidator(int)\" validatorId=\"2\"> \ <String integralValue=\"0\" stringDoc=\"No timing data will be collected (the default).\" stringValue=\"no_timers\"/> \ <String integralValue=\"1\" stringDoc=\"Time an algorithm (or other entity) as a whole.\" stringValue=\"macro_timers\"/> \ <String integralValue=\"2\" stringDoc=\"Time the substeps of an entity.\" stringValue=\"micro_timers\"/> \ <String integralValue=\"3\" stringDoc=\"Run both MACRO and MICRO timers.\" stringValue=\"both_timers\"/> \ <String integralValue=\"4\" stringDoc=\"Run timers added to code for testing, removed later\" stringValue=\"test_timers\"/> \ </Validator> \ <Validator defaultParameterName=\"timer_output_stream\" integralValue=\"int\" type=\"StringIntegralValidator(int)\" validatorId=\"4\"> \ <String integralValue=\"0\" stringValue=\"std::cout\"/> \ <String integralValue=\"0\" stringValue=\"cout\"/> \ <String integralValue=\"0\" stringValue=\"stdout\"/> \ <String integralValue=\"1\" stringValue=\"std::cerr\"/> \ <String integralValue=\"1\" stringValue=\"cerr\"/> \ <String integralValue=\"1\" stringValue=\"stderr\"/> \ <String integralValue=\"2\" stringValue=\"/dev/null\"/> \ <String integralValue=\"2\" stringValue=\"null\"/> \ </Validator> \ <Validator defaultParameterName=\"memory_output_stream\" integralValue=\"int\" type=\"StringIntegralValidator(int)\" validatorId=\"5\"> \ <String integralValue=\"0\" stringValue=\"std::cout\"/> \ <String integralValue=\"0\" stringValue=\"cout\"/> \ <String integralValue=\"0\" stringValue=\"stdout\"/> \ <String integralValue=\"1\" stringValue=\"std::cerr\"/> \ <String integralValue=\"1\" stringValue=\"cerr\"/> \ <String integralValue=\"1\" stringValue=\"stderr\"/> \ <String integralValue=\"2\" stringValue=\"/dev/null\"/> \ <String integralValue=\"2\" stringValue=\"null\"/> \ </Validator> \ <Validator fileMustExist=\"false\" type=\"FilenameValidator\" validatorId=\"6\"/> \ <Validator type=\"IntegerRangeListValidator(int)\" unsorted=\"false\" validatorId=\"7\"/> \ <Validator type=\"IntegerRangeListValidator(int)\" unsorted=\"false\" validatorId=\"9\"/> \ <Validator type=\"IntegerRangeListValidator(int)\" unsorted=\"true\" validatorId=\"8\"/> \ <Validator type=\"StringValidator\" validatorId=\"10\"> \ <String value=\"speed\"/> \ <String value=\"balance\"/> \ <String value=\"quality\"/> \ </Validator> \ <Validator allowDouble=\"true\" allowInt=\"true\" allowString=\"true\" prefferedType=\"double\" type=\"anynumberValidator\" validatorId=\"12\"/> \ <Validator type=\"StringValidator\" validatorId=\"11\"> \ <String value=\"memory\"/> \ <String value=\"balance\"/> \ <String value=\"speed\"/> \ </Validator> \ <Validator type=\"StringValidator\" validatorId=\"13\"> \ <String value=\"rcm\"/> \ <String value=\"minimum_degree\"/> \ <String value=\"natural\"/> \ <String value=\"random\"/> \ </Validator> \ <Validator defaultParameterName=\"compute_metrics\" integralValue=\"int\" type=\"StringIntegralValidator(int)\" validatorId=\"15\"> \ <String integralValue=\"1\" stringValue=\"true\"/> \ <String integralValue=\"1\" stringValue=\"yes\"/> \ <String integralValue=\"1\" stringValue=\"1\"/> \ <String integralValue=\"1\" stringValue=\"on\"/> \ <String integralValue=\"0\" stringValue=\"false\"/> \ <String integralValue=\"0\" stringValue=\"no\"/> \ <String integralValue=\"0\" stringValue=\"0\"/> \ <String integralValue=\"0\" stringValue=\"off\"/> \ </Validator> \ <Validator type=\"StringValidator\" validatorId=\"14\"> \ <String value=\"amd\"/> \ <String value=\"package2\"/> \ <String value=\"package3\"/> \ </Validator> \ <Validator defaultParameterName=\"randomize_input\" integralValue=\"int\" type=\"StringIntegralValidator(int)\" validatorId=\"17\"> \ <String integralValue=\"1\" stringValue=\"true\"/> \ <String integralValue=\"1\" stringValue=\"yes\"/> \ <String integralValue=\"1\" stringValue=\"1\"/> \ <String integralValue=\"1\" stringValue=\"on\"/> \ <String integralValue=\"0\" stringValue=\"false\"/> \ <String integralValue=\"0\" stringValue=\"no\"/> \ <String integralValue=\"0\" stringValue=\"0\"/> \ <String integralValue=\"0\" stringValue=\"off\"/> \ </Validator> \ <Validator type=\"IntegerRangeListValidator(int)\" unsorted=\"true\" validatorId=\"16\"/> \ <Validator allowDouble=\"true\" allowInt=\"true\" allowString=\"true\" prefferedType=\"double\" type=\"anynumberValidator\" validatorId=\"19\"/> \ <Validator allowDouble=\"true\" allowInt=\"true\" allowString=\"true\" prefferedType=\"double\" type=\"anynumberValidator\" validatorId=\"20\"/> \ <Validator type=\"StringValidator\" validatorId=\"18\"> \ <String value=\"balance_object_count\"/> \ <String value=\"balance_object_weight\"/> \ <String value=\"multicriteria_minimize_total_weight\"/> \ <String value=\"multicriteria_minimize_maximum_weight\"/> \ <String value=\"multicriteria_balance_total_maximum\"/> \ <String value=\"minimize_cut_edge_count\"/> \ <String value=\"minimize_cut_edge_weight\"/> \ <String value=\"minimize_neighboring_parts\"/> \ <String value=\"minimize_boundary_vertices\"/> \ </Validator> \ <Validator allowDouble=\"true\" allowInt=\"true\" allowString=\"true\" prefferedType=\"double\" type=\"anynumberValidator\" validatorId=\"21\"/> \ <Validator type=\"StringValidator\" validatorId=\"22\"> \ <String value=\"partition\"/> \ <String value=\"repartition\"/> \ <String value=\"maximize_overlap\"/> \ </Validator> \ <Validator type=\"StringValidator\" validatorId=\"23\"> \ <String value=\"matrix_rows\"/> \ <String value=\"matrix_columns\"/> \ <String value=\"matrix_nonzeros\"/> \ <String value=\"mesh_elements\"/> \ <String value=\"mesh_nodes\"/> \ <String value=\"graph_edges\"/> \ <String value=\"graph_vertices\"/> \ <String value=\"coordinates\"/> \ <String value=\"identifiers\"/> \ </Validator> \ <Validator type=\"StringValidator\" validatorId=\"24\"> \ <String value=\"hypergraph\"/> \ <String value=\"graph\"/> \ <String value=\"geometry\"/> \ <String value=\"ids\"/> \ </Validator> \ <Validator type=\"StringValidator\" validatorId=\"25\"> \ <String value=\"rcb\"/> \ <String value=\"multijagged\"/> \ <String value=\"rib\"/> \ <String value=\"hsfc\"/> \ <String value=\"patoh\"/> \ <String value=\"phg\"/> \ <String value=\"metis\"/> \ <String value=\"parmetis\"/> \ <String value=\"scotch\"/> \ <String value=\"ptscotch\"/> \ <String value=\"block\"/> \ <String value=\"cyclic\"/> \ <String value=\"random\"/> \ </Validator> \ <Validator defaultParameterName=\"rectilinear_blocks\" integralValue=\"int\" type=\"StringIntegralValidator(int)\" validatorId=\"26\"> \ <String integralValue=\"1\" stringValue=\"true\"/> \ <String integralValue=\"1\" stringValue=\"yes\"/> \ <String integralValue=\"1\" stringValue=\"1\"/> \ <String integralValue=\"1\" stringValue=\"on\"/> \ <String integralValue=\"0\" stringValue=\"false\"/> \ <String integralValue=\"0\" stringValue=\"no\"/> \ <String integralValue=\"0\" stringValue=\"0\"/> \ <String integralValue=\"0\" stringValue=\"off\"/> \ </Validator> \ <Validator defaultParameterName=\"average_cuts\" integralValue=\"int\" type=\"StringIntegralValidator(int)\" validatorId=\"27\"> \ <String integralValue=\"1\" stringValue=\"true\"/> \ <String integralValue=\"1\" stringValue=\"yes\"/> \ <String integralValue=\"1\" stringValue=\"1\"/> \ <String integralValue=\"1\" stringValue=\"on\"/> \ <String integralValue=\"0\" stringValue=\"false\"/> \ <String integralValue=\"0\" stringValue=\"no\"/> \ <String integralValue=\"0\" stringValue=\"0\"/> \ <String integralValue=\"0\" stringValue=\"off\"/> \ </Validator> \ <Validator max=\"250\" min=\"1\" precision=\"0\" step=\"1\" type=\"EnhancedNumberValidator(int)\" validatorId=\"28\"/> \ <Validator type=\"StringValidator\" validatorId=\"29\"> \ <String value=\"no\"/> \ <String value=\"transpose\"/> \ <String value=\"bipartite\"/> \ </Validator> \ <Validator defaultParameterName=\"subset_graph\" integralValue=\"int\" type=\"StringIntegralValidator(int)\" validatorId=\"30\"> \ <String integralValue=\"1\" stringValue=\"true\"/> \ <String integralValue=\"1\" stringValue=\"yes\"/> \ <String integralValue=\"1\" stringValue=\"1\"/> \ <String integralValue=\"1\" stringValue=\"on\"/> \ <String integralValue=\"0\" stringValue=\"false\"/> \ <String integralValue=\"0\" stringValue=\"no\"/> \ <String integralValue=\"0\" stringValue=\"0\"/> \ <String integralValue=\"0\" stringValue=\"off\"/> \ </Validator> \ <Validator defaultParameterName=\"force_binary_search\" integralValue=\"int\" type=\"StringIntegralValidator(int)\" validatorId=\"31\"> \ <String integralValue=\"1\" stringValue=\"true\"/> \ <String integralValue=\"1\" stringValue=\"yes\"/> \ <String integralValue=\"1\" stringValue=\"1\"/> \ <String integralValue=\"1\" stringValue=\"on\"/> \ <String integralValue=\"0\" stringValue=\"false\"/> \ <String integralValue=\"0\" stringValue=\"no\"/> \ <String integralValue=\"0\" stringValue=\"0\"/> \ <String integralValue=\"0\" stringValue=\"off\"/> \ </Validator> \ <Validator defaultParameterName=\"force_linear_search\" integralValue=\"int\" type=\"StringIntegralValidator(int)\" validatorId=\"32\"> \ <String integralValue=\"1\" stringValue=\"true\"/> \ <String integralValue=\"1\" stringValue=\"yes\"/> \ <String integralValue=\"1\" stringValue=\"1\"/> \ <String integralValue=\"1\" stringValue=\"on\"/> \ <String integralValue=\"0\" stringValue=\"false\"/> \ <String integralValue=\"0\" stringValue=\"no\"/> \ <String integralValue=\"0\" stringValue=\"0\"/> \ <String integralValue=\"0\" stringValue=\"off\"/> \ </Validator> \ <Validator defaultParameterName=\"parallel_part_calculation_count\" allowDouble=\"false\" allowInt=\"true\" allowString=\"true\" prefferedType=\"int\" type=\"anynumberValidator\" validatorId=\"33\"/> \ </Validators> \ </ParameterList>"

Definition at line 53 of file Zoltan2_XML_Parameters.hpp.